Español

Español

Disilicato de litio

Hogar / Productos / Disilicato de litio / Lithium Disilicate B40

  • Lithium Disilicate B40

  • Lithium Disilicate B40

  • Lithium Disilicate B40

  • Lithium Disilicate B40

Lithium Disilicate B40

Glass ceramics play an indispensable role in human body aesthetics restoration materials, There are two kinds lithium disilicate are available: Press and CAD.

Glass ceramics play an indispensable role in human body aesthetics restoration materials, There are two kinds lithium disilicate are available: Press and CAD.

① Ingots press. It needs to be die-casted in a porcelain-casting furnace in a high-temperature environment, and the resulting veneer has a good effect.

It can be divided into two types according to the permeability of the porcelain block:

HT(highly transparent, A1, A2, A3, A3.5, B1, B2, C1, BL1, BL2, BL3, BL4, 11 colors in total)

LT (low degree of transparency, A1, A2, A3, B1, B2, C1, C2, BL1, BL2, BL3, BL4 11 colors in total)

MO: M01, M02


② CAD blocks is in the partial crystallization stage (light purple) during the crafting process, which is easy for the equipment to grind.

According to the length, it is divided into C14 and B40.

It can be divided into two types according to the permeability of the porcelain block:

HT (highly transparent, VA-VD 16 colors, BL1, BL2, BL3, BL4, 20 colors in total)

LT (low degree of transparency, VA-VD 16 colors, BL1, BL2, BL3, BL4, 20 colors in total)

Note: There are two sizes of each transparent porcelain block: 18-15-13; 40-15-15


Advantages:

1. High aesthetic repair effect

2. High chemical stability and binging strength

3. Easy milling, prolong the service life of burs

4. Simple and rapid crystallization process to reduce operating time

5. Every time without glaze, the unique color change effect to ensure perfect repair effect


Lithium Disilicate B40


Lithium Disilicate B40


Place of OriginChina (Mainland)
PropertiesCrowns/Inlay/Onlay
MainlandShandong, China
Model numberD13-10
Product nameLithium disilicate blocks
MaterialGlass ceramic
ColorRequests
ApplicationDental laboratory
FeatureWear resistance
CertificateISO13485
UsageDentures
Size13mm*10mm
Instrument classificationClass I, Class II


Place of OriginChina (Mainland)
Brand NameGlorious
Model Numbe15-12-10 18-15-13
Namedental disilicate lithium
Materialglass ceramic
UsageDentures
Packing5pcs/packing
CertificateCE/ISO13485
ApplicationDental Laboratory
FeatureConvenient
TypeHT/LT
PropertiesVeneer/Inlay/Onlay
Packing5pcs/packing
CertificateCE/ISO13485
ApplicationDental Laboratory
FeatureConvenient


Compared

Translucency categoriesHT(High translucency)LT(Low translucency)MO(Moderate opacity)HO(High opacity)
Processing techniqueStaining techniqueStaining or Cut-Back techniquePorcelain techniquePorcelain technique
indicationVeneer



Inlay



Onlay


Partial crown


Anterior crown

Posterior crown


FAQ:

1.How to choose a suitable color and translucency?

Answer: Consider the following 5 respects when the clinics and technicians use the Lithium disilicate:

①The color of the final restoration

②The color of the prepared abutment

③The shape, size and thickness of the restoration

④The processing technique for the restoration

⑤The bonding material used and its color


2.What are the operating procedures for casting porcelain?

Model Preparation -Wax-up fabrication- Sprueing- Embedding- Preheating-Die Casting-Remove the embedding-cutting the sprue, try on and repair the model-finish the porcelain or glaze

3.What are the operating steps of CAD glass ceramics?

Scanning-Design-Typesetting-Processing-Separation of Restoration-Try-on and Trimming-Toning and Glazing-Finish


Precautions:

1. Don't get too close when cutting.For restoration, it is recommended to cut approximately 0.3mm along the supporting surface to avoid crown cracks caused by cutting

2. Use a special glass ceramic grinding tool to ensure that the restoration has a reasonable density through grinding. Closeness, bite, and adjacent surface contact.

3. During secondary crystallization, the restoration should be placed on high temperature cotton or a special sintered material should be used as support

4. Only low-temperature glazing materials can be used when glazing, and the recommended sintering temperature is less than 840℃


Lithium Disilicate B40

ETIQUETAS:

Enviar un mensaje