INDICATIONS
The Ceramco3 veneering porcelains may be used for all single and multiple unit porcelain fused-to-metal fixed prosthodontics.
PRODUCT INFORMATION
Ceramco 3 veneering porcelains may be used for fixed prosthodontics using conventional high fusing ceramic alloys with or without silver.
CONTRAINDICATIONS
Only the indications listed above are suitable.
WARNINGS/ADVERSE REACTIONS
Consult Ceramco3 SDS (Safety Data Sheets) for safe handling and usage. Use only with recommended Ceramco 3 system components. Use protective equipment to guard against dust when grinding.
PRECAUTIONS
Refer to the special notes throughout the instructions for best practices for using Ceramco3 materials.
PORCELAIN FURNACE
For optimum results, be sure your porcelain furnace is accurately calibrated and manufacturer recommended firing times and temperatures are followed. If necessary, adjust the furnace parameters to obtain the correct visual indicator.
SAGGER TRAYS
During the firing cycle, large sagger trays will absorb some of the heat and may effect the appearance of the porcelain. For optimum results, only use the honeycomb style trays with the metal firing pins.
LIQUIDS
Caution should be used in selecting modeling and staining liquids. DENTSPLY liquids are recommended for their ability to improve the handling and carving of the porcelain, to reduce slumping during build-up, and to prevent any silver discoloration. Distilled water may also be used. However, other build-up and/or stain liquids may leave a residue behind that could cause discoloration.
STORAGE
Store materials in packages with the lid tightly sealed. Do not leave open bottles where dust and debris may contaminate the porcelain. Replace cap when not in use. Avoid vibration and heat. Keep dry. Shake well before use. The lot number is printed on each bottle; please refer to the lot number in all correspondence. Do not use after expiration date. DO NOT FREEZE, Margin & Opaque Correction Liquid, REF # 301916.
ALLOY SELECTION
Ceramco3 is compatible with high noble, noble and predominately base alloys. Be sure to consult the alloy manufacturer for alloy compositions and coefficient of thermal expansion data. Ceramco3 will resist discoloration on silver containing alloys; however, routine purging of the porcelain furnace and sagger trays is highly recommended.
Video de productos
Enviar un mensaje
